Mylee Complete Professional Waxing Kit - Coconut & Arnica

For the silkiest, smoothest finish, reach for the best professional waxing kit you can get your hands on. Containing everything you need to prep your skin and remove unwanted hair, this kit will deliver the best results every time!

The Mylee Complete Professional Waxing Kit also includes pre and aftercare products to nourish your skin and all the accessories you need for a stunning result.

• Best professional waxing kit for silky skin
• Easy stripless waxing system
• Includes wax heater
• Pre and aftercare products too!

We’ve covered all bases with this kit. It includes a professional wax heater, coconut and arnica wax beads, wooden waxing spatulas, pre-care gel, aftercare lotion and equipment cleaner.

This product works perfectly with Mylee 2 In 1 Pre And Post Hair Removal Oil and Mylee Exfoliating Body Scrub 250ml.

Professional Waxing Kit Contents

• Professional Wax Heater
• Coconut & Arnica Wax Beads
• Disposable Waxing Spatulas (Pack of 100)
• Pre-Care Gel
• After-Care Lotion
• Equipment Cleaner.

How to use the Mylee Professional Waxing Kit:

1. Place the stripless wax beads in the heater inside the removable bucket and let it melt - always test the temperature on the inside of your wrist. The wax should be warm and should not burn the skin.
2. Next you'll want to prepare the skin, massage the pre-wax care gel over the area you’d like to wax, this cleanses the skin and ensures there is no oil or residue left on the skin that could interfere with the end result. Wait for this to dry before applying any wax.
3. Using a spatula spread a layer of wax onto the area to be treated in the direction of hair growth.
4. Wait until stripless wax has cooled and hardened/set then pull off wax with a firm action against the direction of hair growth.
5. Repeat until all hair is removed in the area.
6. Gently massaging a small amount of after care lotion over the waxed area to cool, soothe and hydrate the skin.

We recommend all waxes are patch tested before use.

Caution: If product comes in contact with eyes, wash with cold clean water. FOR EXTERNAL USE ONLY.

Product Code: MYL-KIT2-COCONUT-EU

STEP 1. HEAT
Place your Mylee Advanced Professional Stripless Wax into the Mylee Digital Wax Heater* using the Mylee Silicone Jar*. Allow the beads to melt to a smooth, even consistency. Always test the temperature on the inside of your wrist - it should feel warm, never hot.

STEP 2. PREP
Ensure the skin is clean, dry and free from any oil, makeup or impurities before waxing. Apply a thin layer of Mylee Pre & Post Wax Oil* using a cotton pad* or clean hands to create a protective barrier, helping the wax grip hair, not skin.

STEP 3. APPLY
Using a Mylee Disposable Spatula*, spread a layer of wax evenly in the direction of hair growth. Allow the wax to cool and harden. Hold the skin taut and remove the wax in one firm motion against the direction of hair growth. Repeat as needed until the area is smooth.

STEP 4. FINISH & CARE
Apply Mylee Pre & Post Wax Oil* to remove any wax residue and help nourish the skin. 

*Products sold separately.

Mastering the Mylee Advanced Stripless Wax is all about that "cool and pull" technique.

• Getting the temp right is everything. You want your wax to look like thick, gooey honey - not runny water!
  Melt your wax using a high heat for about 15-20 minutes, then turn the dial down to medium. Our Digital wax Heater does this for you automatically! If the wax runs off your spatula instantly, it’s too hot. Let it sit for a minute until it stays on the stick for a few seconds when you twirl it.

• When you apply your wax in a strip, make sure the very end (where there is no hair) is a little bit thicker than the rest. This creates a "pull tab" or lip. It means you can get a firm grip and flick it back without having to pick at the edge.
  
• Don't be shy with that spatula! If you apply the wax too lightly, it won't "shrink-wrap" the hair.
  
• Use firm, even pressure when spreading the wax in the direction of hair growth. You want to really push the wax into the hair follicles so it grabs every single strand from the root.
  
• Hold the skin as taut as possible. When you pull the wax off, keep your hand parallel and close to the skin, pulling back in the opposite direction of growth. Think of it as a "flick" rather than a "lift" - it’s faster, smoother, and way less "ouchy."
  
• As soon as you’ve pulled the wax strip off, immediately press your palm firmly onto the skin for a few seconds. The pressure confuses your nerves and stops the "sting" before it even starts. Total game-changer!
  
• Use the Mylee Silicone Bucket for your beads. Once you’re finished and the wax has cooled completely, just "pop" the hardened wax disc out. You can save it for your next session or wipe the bucket clean in seconds. No mess, no stress.

Coconut & Arnica Stripless Wax: Hydrogenated Styrene/Methylstyrene/Indene Copolymer, Ethylene/VA Copolymer, Paraffin, Paraffinum Liquidum (Mineral Oil), Arnica Montana (Arnica) Flower Extract, Zea Mays (Corn) Oil, Parfum (Fragrance), Anise Alcohol, CI 77891 (Titanium Dioxide).

After Care Lotion; Aqua (Water), Stearic Acid, Propylene Glycol, Paraffinum Liquidum, Cetearyl Alcohol, Glycerin, Glyceryl Stearate SE, Polysorbate 20, Phenoxyethanol, Triethanolamine, Carbomer, Ethylhexylglycerin, Parfum (Fragrance), Aloe Barbadensis Leaf Juice, Terpineol, Citronellol, Alpha-Isomethyl Ionone, Amyl Cinnamal, Cinnamyl Alcohol, Linalool, Hydroxycitronellal, Linalyl Acetate, Geraniol, Citric Acid, Potassium Sorbate.

Pre Care Cleansing Gel: Aqua (Water), Alcohol Denat., Carbomer, Triethanolamine, Aloe Barbadensis Leaf Juice, Menthol, Parfum (Fragrance), Terpineol, Citronellol, Alpha-Isomethyl Ionone, Citric Acid, Potassium Sorbate, CI 18050 (Red 1).

Wax Equipment Cleaner: Paraffinum Liquidum (Mineral Oil).