Mylee Digital Wax Heater

Mylee provides salons, professionals and home users with high-quality waxing products. We've got you covered through every stage of the waxing process, making sure you have the perfect equipment for the best results.

We recommend all waxes are patch tested before use.

Professional Wax Heater comes with a 12 month warranty.


For use with Mylee Crème and Soft wax pots:

Step 1: Remove the clear lid.
Step 1: Remove the silicone jar from the heating chamber and place to one side as you will not need it.
Step 1: Take the lid off the crème or soft wax and place the pot directly into the heating chamber.
Step 1: Secure the clear lid over the top of the heater.
Step 1: Press the power button.
Step 1: Press the MELT button once to enter C1 mode (suitable for half a pot of crème wax) or,
Step 1: Press the MELT button twice to enter C2 mode (suitable for a full pot of crème wax).

For use with Mylee Stripless wax:

Step 1: Remove the clear lid.
Step 1: Fill the silicone jar to your desired level with the wax beads.
Step 1: Secure the lid over the top of the heater.
Step 1: Press the power button once.
Step 1: Press the MELT button three times to enter the H1 setting (suitable for a minimum of 100g of wax).
Step 1: Press the MELT button four times to enter the H2 setting (suitable for 200g of wax or more).

To cancel the MELTing cycle, press the – button at any time. You are now back in the manual setting. When the wax is ready for use, the device will beep. Remove the lid and mix thoroughly with a spatula, checking the consistency.

Always check the consistency of the wax before application and carry out a patch test on the inside of your wrist.
At the right temperature, your wax should have the consistency of thick honey. When loading your spatula, you should be able to turn it two or three times to have a good dollop on the top that doesnt run off if you stop twirling it. A good rule of thumb is, if the wax drips while you twirl - it's too hot. It should also glide easily onto the skin, so when the wax is too stringy and doesn't spread seamlessly, you'll need to give it more time to heat.

When the full treatment is complete, just turn off the device and unplug from the mains. Allow your wax to cool down before removing the silicone jar from the heater. Any leftover wax can be reheated and then reused.

What setting to use:

C1 - For half a pot of soft/creme wax. Estimated duration 20 mins
C2 - For a full pot of soft/creme wax. Estimated duration 40 mins
H1 - For half a pot of hard/stripless wax. Estimated duration 20 mins
H2 - For a full pot of hard/stripless wax. Estimated duration 40 mins

These durations are estimated and the final duration will depend on each wax formula, the amount you are melting and the ambient temperature. We recommend to always mix your wax throughly to spread the heat at the end of the preset settings. If you have followed the recommended quantity, your wax will not be fully melted but should be at the temperature safe for use.

Top Tip! Speed up the cooling time by removing the lid.

Product Code: MYL-WH-BLK-EU